[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [linrad] More SuSE 8.2 Help



try to experiment first with the programme krecord( it is in suse 8.2). That
has a recording level indicator and helps you in setting the mixer controls.
If you are able to record and replay a sound with krecord than linrad should
work ok.(Switch off krecord before starting linrad)
I have no knowledge about the screen problems.
arie
----- Original Message -----
From: Terry <terry@xxxxxxxxxxxxx>
To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Sunday, August 03, 2003 3:42 AM
Subject: [linrad] More SuSE 8.2 Help


> Gang,
>
>     With Arie's help I have svgalib installed.   The RPM he provided
worked
> great.   I had to go in and change some settings in libvga.config but I
now
> have the screen working... sort of.   The image is very very dim and there
> is no color.   I am using an ATI Expert 128 card with a Rage 128 chip and
a
> Phillips 150S LCD monitor.   Any ideas any one?   Has any one else even
> seen this?
>
>     I am trying to use the built in AV97 sound since I can't use my old
old
> soundblaster card any more.   New motherboards don't have ISA slots any
> more.   I can hear sound in the headphones but don't see it on the display
> and changing the settings don't effect the audio levels.   It is obvious
> that the sound is not going through the linrad processor.   Any ideas on
> what I'm doing wrong here?
>
> Terry  KJ7F
>
>
LINRADDARNIL
o