[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linrad] Fwd: Re: Sometimes You Feel Like a Nut
>At 01:55 AM 5/3/2005 +0200, you wrote:
> >It is like Alice in the Wonderland. What do you want to do?
>Leif, many thanks for the reply. At this point I would like to use Linrad
>in it's most rudimentary form. Initially I want to use the output of my
>receiver in normal SSB bandwidth, and reduce line noise etc (as much as
>possible with the inherent bandwidth limitations) on 2 meter tropo. I also
>want to take the output of Linrad(from a dedicated computer) and feed it
>into another computer running JT65B on 2 meter EME, once again to reduce
>local noise. There are a couple of other possibilities:
>1) I am currently taking the 10.7 mHz IF output from a IC-271A 2 meter rig
>and feeding it into my FT-1000MP. Front end
>NF = approx 0.25 dB, plus another approx 0.2 dB line loss. That 10.7 mHz
>bandwidth is about 18 kHz. I have considered the possibility of mixing
>that signal down to baseband and into Linrad.
>2) The other consideration is to take the 28 mHz output from a 2 meter
>converter(nice and broad) and mix that to baseband.
> >First of all you are limited by your hardware. The frequency, bandwidth
> sensitivity and dynamic range is determined by analog >hardware. Without
> knowing what you have and what kind of signals you want to look for I
> just can not answer the
> >first question.
>In addition to the above RF equipment, computer hardware is a 500 mHz AMD
>K6-2 and a 16 bit ISA Soundblaster. I have purchased a 24 bit PCI
>Soundblaster Live card, and it should be online by the weekend.
> >How do I turn the noise blanker on? This depends on your situation. What
> bandwidth do you use, what is the dynamic range of your >hardware and so on.
>I don't have the foggiest idea about the dynamic range of the
>hardware. Are we talking about computer hardware or RF hardware. Being
>of a Windows mind-set, I want to click a button that says "turn the
>blanker on and enjoy".
> >In case you use 2 kHz bandwidth from the loudspeaker output of a radio
> on which you can not turn off the AGC, Linrad can
> >not do the blanking particularly well. It then depends on the repetition
> rate of the pulses and the AGC characteristics
> >of the analog receiver.
>I can turn the AGC off in the FT-1000MP, but not in the IC-271.
> >MS Windows version will behave exactly the same - at least to start with
> I think.
>That would be OK, however, I would expect that with a windows version, I
>would be free from the miseries of roots, owners, users, permissions,
>dependencies, multiple variations of the OS who do not always like each
>other, and line after line of hand entered code, thus leaving more time to
>concentrate on the software itself.
> >I hope you have already taken some steps forward by help of the
> information that Roger, W3SZ supplied.
>Yes, I started reading that and printed several pages to read. Since I
>started trying to understand Linux and Linrad, I have printed enough
>information to form a stack about two inches high, plus what I read online
>and didn't print.
> >You are in command.
>Thanks for your generous complement, but right now this is clearly not the
>case. We have a saying here in the southern US:
>"he is like a blind dog in a meat cooler". Yep, that pretty well sums it up.
> Thanks again, I will keep reading.
This message is sent to you because you are subscribed to
the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>