[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] RE: soundcard duplex mode
Have you tried running the oss utility soundconf ? That will also list what
can be found.
----- Original Message -----
From: "Rob Hardenberg" <rob@xxxxxxxxxxxxxxx>
Sent: Sunday, October 24, 2004 10:34 PM
Subject: Re: [linrad] RE: soundcard duplex mode
> Hi Leif,
> I use Redhat 9.0, linrad 01.26 and oss3991h-linux-x86-v24.tar.
> When I do in linrad the 'U' option since I installed oss I get a list of
> devices: /dev/dsp and /dev/dsp0 both marked 'wronly' en 'rdonly'. When I
> select one, its opened as rwonly and the message that no write device
> be found.
> Rob PE1ITR
> ----- Original Message -----
> From: "Leif Åsbrink" <leif.asbrink@xxxxxxxxxxxxxxxx>
> To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
> Sent: Sunday, October 24, 2004 6:54 PM
> Subject: [linrad] RE: soundcard duplex mode
> > Hi Rob,
> > I verified that Linrad still works ok with full duplex under
> > OSS on my MMX 200 MHz computer. I tried Mandrake 8.1 with
> > oss-3.9.8c. I do not think anything can be done with oss
> > parameters, not in these older oss versions at least.
> > What oss version and Linux distribution do you use?
> > 73
> > Leif / SM5BSZ
> >> I improved my linrad setup to a new computer setup: 200mmx
> >> pentium and awe64
> >> gold soundcard. Using OSS
> >> I can't get the duplex mode in linrad working. Linrad doesn't see
> >> the card
> >> as duplex. In linrad the input is working ok and output from a file is
> >> working also ok. But listening "realtime" isn't working.
> >> I used the card in a former windows setup in full duplex, but had
> >> to switch
> >> it on. I think i'm missing a setting parameter here in oss, can
> >> anyone help
> >> me out?
> >> I've tried also with the soundblaster 16 vibra C, but the same results
> >> above descibed.