[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [linrad] RE: soundcard duplex mode



Hi Leif,

I use Redhat 9.0, linrad 01.26 and oss3991h-linux-x86-v24.tar.
When I do in linrad the 'U' option since I installed oss I get a list of two 
devices: /dev/dsp and /dev/dsp0 both marked 'wronly' en 'rdonly'. When I 
select one, its opened as rwonly and the message that no write device could 
be found.

Rob PE1ITR

----- Original Message ----- 
From: "Leif Åsbrink" <leif.asbrink@xxxxxxxxxxxxxxxx>
To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Sunday, October 24, 2004 6:54 PM
Subject: [linrad] RE: soundcard duplex mode


> Hi Rob,
>
> I verified that Linrad still works ok with full duplex under
> OSS on my MMX 200 MHz computer. I tried Mandrake 8.1 with
> oss-3.9.8c. I do not think anything can be done with oss
> parameters, not in these older oss versions at least.
>
> What oss version and Linux distribution do you use?
>
> 73
>
> Leif / SM5BSZ
>
>
>
>> I improved my linrad setup to a new computer setup: 200mmx
>> pentium and awe64
>> gold soundcard. Using OSS
>> I can't get the duplex mode in linrad working. Linrad doesn't see
>> the card
>> as duplex. In linrad the input is working ok and output from a file is
>> working also ok. But listening "realtime" isn't working.
>> I used the card in a former windows setup in full duplex, but had
>> to switch
>> it on. I think i'm missing a setting parameter here in oss, can
>> anyone help
>> me out?
>> I've tried also with the soundblaster 16 vibra C, but the same results as
>> above descibed.
>
> 


LINRADDARNIL
>