[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: Level Delta44



Hi Ermanno and all,

> If it you could be of interest to anybody.
> Insert the parameter envy24_gain_sliders= 1 in the file etc/options.cfg
> With this modification could be regulated with continuity (0- 255) the 
> levels of input and output for each channel of the Delta44.
Hmm, have you tried to set a strong signal so it just saturates the A/D,
then turn down by 3 dB and check if it is no longer saturated.

Maybe the Delta44 hardware has 6 dB steps and the continous gain control
is then done in software. If so the A/D would stay saturated and nothing
would be gained (but some needless CPU load would be added)

Would be interesting to know if someone would try this. I am not 
using ALSA so I can not easily try this myself.

73

Leif / SM5BSZ

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL