[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: LINRAD and SDR IQ
- Subject: [Linrad] Re: LINRAD and SDR IQ
- From: "Mario A. Natali, I0NAA" <gmail.com; mario.i0naa@xxxxxxxxxxxxxxxx>
- Date: Tue, 24 Feb 2009 22:43:12 +0100
another small step ..... !!
Now bypassing the helper by editing the "libvga.config" the command ./linrad
ask to run linrad in root mode BUT when I do that ( with sudo command ) the
program first blank the screen and after that gives a very colored screen
good for this period of carnival ... but less useful for Linrad .... ah ah
Maybe there is still some problem with svgalib; what I am planning to do is
to install the latest version of svgalib and see what will happen..
Running ./xlinrad ( even after rebooting after running "make sdr14" ) still
the system do not see the SDR and ask for sound card.
I will have some time, I hope, during the week end !!
Any other hint will be much appreciated !
73 de i0naa, Mario
----- Original Message -----
From: "Leif Asbrink" <leif@xxxxxxxxxx>
Sent: Tuesday, February 24, 2009 2:32 AM
Subject: [Linrad] Re: LINRAD and SDR IQ
> Hi Mario,
>> some progress made !!!!
>> Let me recap what I did :
>> 1 - I downloaded lir 03-2.
>> 2 - I have to issue the cmd : "chmod a+x ./configure" before being able
>> use configure, but after that everything worked perfectly. Do not
> This is new to me. The configure script and the linrad executable
> have the same flags on my system. Maybe UBUNTU changes flags on
> executable files when unpacking with bunzip2 (or tar -xvfj).
> Or maybe there is some unpacker in X11 that you used. UBUNTU
> seems to introduce safety featutes now and then that make things
> It is a long time since anyone posted installation questions on
> this list and it seems I will have to rewrite the installation
> instructions. Is there someone out there who would woulounteer to
> assist in this? I do not use UBUNTU myself.......
>> 3 - I issued "make sdr14" : : ok
>> 4 - I issued "make linrad" : ok
>> 5 - I tried : "./linrad" but the systems answered : "is svglib_helper
>> modeule loaded ?"
>> 6 - I issued "make xlinrad" : ok
>> 7 - I issued : ./xlinrad : ok
>> I think I have a proble with svgalib : I repeated all the intallation as
>> your instructions, but when I Issue "make install" I am getting several
>> errors ; something to do with UBUNTU 8.1 ? I am using svgalib 1925.
> svgalib 1.9.25 is a pre-release. Not too well supported. The Linux kernel
> has been changed many times since 1.9.25 was released and the code for
> the svgalib kernel module has not been updated.
> Luckily one does not need the kernel module any more. By running Linrad
> as root you can use the option NoHelper in the svgalib configuration
> file /etc/vga/libvga.config
> I prefer svgalib in terminal mode over xlinrad under X11.
>> When I run "./xlinrad", anyway, the system apparently do not see the
> After you executed the "make sdr14" command you have to reboot.
> (Or install the ftdi driver manually "/etc/linrad/usb_sdr14 start")
>> I do see think progressing, at the end I will restart from scratch and
>> write down the full procedure , so it will help some other newcomer like
> Oooh! That will be fine:-)
> Leif / SM5BSZ
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en