[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: MAP65 for SDR-IQ
- Subject: [Linrad] Re: MAP65 for SDR-IQ
- From: Edward Cole <acsalaska.net; kl7uw@xxxxxxxxxxxxxxxx>
- Date: Tue, 03 Mar 2009 06:44:26 -0900
I have Linrad(win) installed and sort-of working (have to verify if
the SDR-IQ is sending it data), and installed MAP65-iq (it
launches). I have been saving all the e-mail in anticipation of
encountering some same issues getting it running. This is in the new
Dell Vostro duoCore-2 2.33GB computer running XP-pro (with all auto upgrades).
I currently run JT-65 (v5.9.0) with my FT-847 thru the soundcard of
my 9-year old P3-866 which runs win2000pro.
I split the 144-MHz output of my 2nd preamp between the FT-847
(modified for separate Rx antenna) and the DEMI 144/28 that feeds a
MAR-6 IFamp to the SDR-IQ. I have previously verified good
performance using either Spectravue or Winrad.
With this setup I can monitor either polarity of my 2m-eme array by
switching the Rx-pol coax relay. Now that I (finally) have my 8877
amp running, I will be able to put some attention to getting MAP65
working with Linrad.
So PLEASE keep posting your trials in getting MAP65 working...I'll be
following close behind!
73, Ed - KL7UW
At 05:24 AM 3/3/2009, Joe Taylor wrote:
>Hi Ned and all,
> > One more update...
> > I got it all to work. I had the wrong IP address for the 2nd computer
> > on the network. Once I got that right, it all came together.
> > Everything working OK, finally.
> > ... So, I pulled in a new,
> > dual core laptop (actually my wife's computer) running Vista and
> > within ten minutes I had MAP65-IQ working on that machine with almost
> > imperceptible delay.
> > Good stuff. Looking forward to trying this over the upcoming weekend.
>One more thing, to you and to others who now have Linrad and
>MAP65-IQ running: please share some comments on performance,
>program features, bugs, etc., here after you have spent some
> on-the-air time using it. That will help me a great deal
>in getting the inevitable bugs out, in writing better
>start-up instructions, and maybe even writing a real MAP65
> -- Joe, K1JT
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en