[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Softrock EMU Linrad
- Subject: Re: Softrock EMU Linrad
- From: Kenrad <cs.com; ke2n@xxxxxxxxxxxxxxxx>
- Date: Fri, 4 Jan 2008 06:46:33 -0800 (PST)
> Firstly, since it is a driver bug, what does the manufacturer say?
> Will it be soon corrected?
I have sent an Email to EMU technical support for some information on
this issue (stay tuned, but don't hold your breath)
I am not sure it is a bug though. One of the options in the Steinberg
ASIO standard is an "interleaved" buffer structure -
I can imagine an arrangement where, for 192 ksps rate, you might
transfer 4 samples of the left channel followed by 4 samples of the
right channel (etc). In that case the 4 sample delay is just inherent
in the scheme...the user software has to take care of lining up the
> Secondly, how are the Linux drivers? ALSA and OSS. If at least one
> of them is OK, then there is no need to include this fix in the Linux
> version of the Linrad hardware interface.
Good question. The BSD web site has some drivers for EMU but I am not
competent to get them working with the BSD flavor of Linux that I had
running briefly. There are actually two drivers, one is referred to
as FPGA which I assume is for the controller part of the board (which
must be downloaded each time you boot up) and another one for LInux to
actually talk to the board- this is the ALSA part. The 4 sample delay
could appear in the Linux driver as well, if it was written to "mimic"
the pre-existing WIndows version.
> First of all, how does the present calibration routine of Linrad
> work with your EMU-1212 card? Presumably it works for some
> range at the center of the passband where one sample is not
> a big phase shift. If it does not work well I would need to know
> how it works under Linux. There are only 49 members on this list,
> so chances are not so good, but maybe there is someone who knows.
I don't have my Softrock yet, but will report back, if no one else
beats me to it.
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad