AW: [linrad] delta 44

[ECarstensen@xxxxxxxxxxxxxxxxxxxx]

Hello Arie,
thank you for your reply!!
The information abt the lib files in SuSe 8.2 is very interesting. I will
try this after the next upgrade.

May i ask you for more information abt. the soundcard problem?
How can i change the link of the dsp dev file from dsp0 to dsp1? I am no
linux expert.
I want to run the glfer fft software on the SB AWE 64  (and not with the
delta 44)card with my normal soundcard interface also used for wsjt and
spectran or hamview.

I believe that alsa supports the delta 44 very well. I could use the card
under alsa and both cards very without problems installed under SuSe 8.1 or
8.2.
But the only thing that does not work was linrad. Because i got no further
information on this problem i bought the oss license and linrad works but
now i have the problems with the other programs.



-----Ursprüngliche Nachricht-----
Von: owner-linrad@xxxxxxxxxxxxxxxxxxxxxx
[mailto:owner-linrad@xxxxxxxxxxxxxxxxxxxxxx]Im Auftrag von Arie Dogterom
Gesendet: Freitag, 21. November 2003 13:10
An: linrad@xxxxxxxxxxxxxxxxxxxxxx
Betreff: Re: [linrad] delta 44


Hallo Ernst,

a. I did not have an svgalib problem with SuSE 8.2, but look where svgalib
puts its libraries after installation. It is different from what Leif
indicates so you have to adapt the linking.

b. If you have more than one soundcard you have to link the dsp dev file to
dsp0 or dsp1 . Standard it is linked to dsp0 but in your case probably it
should link to dsp1.

c. According to alsa supported cards page  the delta 44 is supported through
snd-ice1712

73

Arie


----- Original Message -----
From: E.G.C. <ECarstensen@xxxxxxxxxxx>
To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, November 21, 2003 12:07 PM
Subject: [linrad] delta 44


> Hello,
>
> in the moment i am running Linrad 1.08 under SuSe 8.1 (SuSe 8.2 does not
> work with svgalib)with an Delta 44 and SB AWE 64 under OSS.
> Before changing from alsa to OSS the KDE uses the SB AWE 64 for system
> ouputs and the delta 44 (invy24)or SB AWE 64 alsa-mixers are available
under
> KDE.
> I changed from alsa to oss to keep linrad running with the delta 44.
> The problem is, that the KDE seems to use the first soundcard (delta 44)
for
> system outputs.
> How can i tell the system to use the second soundcard for system outputs.
>
> How can i change the input gain of the delta 44? With Ossmix or ossxmix i
> can only change from +4 db to -10db relative level.
> Is it possible to use a kind of batch file, to make the delta 44 drivers
> "aktive" only when linrad is used and after finishing linrad to remove all
> delta 44 relative drivers so that the system only uses the sb awe 64 for
> input and output?
>
> Thanks for any help in advance
> ernst, dl2lac
>



LINRADDARNIL