#!/bin/bash

rm -rf kill.all.base

# define name used in the RMI registry
NAME=SDR1000
export SDR_DEFRATE=48000

export FIFO_HOME=/dev/shm

# start jackd (firewire fa-66)
echo "starting jackd ..."
#FA-66
/usr/local/bin/jackd -R -P20 -d firewire -dhw:0 -r$SDR_DEFRATE -p1024 -n3  &
#DELTA-44
#/usr/local/bin/jackd -R -dalsa -dhw:1 -r$SDR_DEFRATE -p1024 -n3&
#/usr/local/bin/jackd -R -P20 -d dummy -r$SDR_DEFRATE -p1024 &

sleep 5
# start RX DttSP
echo "starting DttSP ${NAME}RX ..."

sdr-core --spectrum --metering --client-name=${NAME}RX --buffsize=1024 --ringmult=4 --meter-port=19003 --spectrum-port=19002 --command-port=19001 &

echo "kill -9 $!" >> kill.all.base

#sleep 5
# start TX DttSP
###cd /Radio/Radio/bin/linux
#echo "starting DttSP ${NAME}TX ..."
#cd /Radio/Radio/bin/linux
#./sdr-core -s -m --client-name=${NAME}TX --buffsize=1024 --ringmult=4 --meter-path=${FIFO_HOME}/${NAME}TXmeter --spectrum-path=${FIFO_HOME}/${NAME}TXspectrum&

sleep 5
# connect receiver
echo "connecting receiver ..."
/usr/local/bin/jack_connect system:capture_3 ${NAME}RX:il
sleep 1
/usr/local/bin/jack_connect system:capture_4 ${NAME}RX:ir
sleep 1
/usr/local/bin/jack_connect ${NAME}RX:ol system:playback_7
sleep 1
/usr/local/bin/jack_connect ${NAME}RX:or system:playback_8
sleep 1

# connect transmitter
#echo "connecting transmitter ..."
#/usr/local/bin/jack_connect system:capture_1 ${NAME}TX:il
#sleep 2
#/usr/local/bin/jack_connect system:capture_2 ${NAME}TX:ir
#sleep 2
#/usr/local/bin/jack_connect ${NAME}TX:ol system:playback_3
#sleep 2
#/usr/local/bin/jack_connect ${NAME}TX:or system:playback_4
#sleep 2

# start the SDR1000 hardware interface
# -ux   x=0 uses parallel port
#       x=1 uses usb port
# -rx   x=0 RFE not present
#       x=1 REF present
# -ax   x=0 PA not present
#       x=1 PA present
# -px   x=hex port address for parallel port (if used)
#
# -cPath path of command fifo
# -sPath path of status fifo
#
#echo "Starting SDR1000 hardware interface"
#USB=1
#RFE=1
#PA=1
#PORT=0x384
#./sdr1000.32 -u$USB -r$RFE -a$PA -p$PORT -f${FIFO_HOME} -c${NAME}hwcommands -s 19001 hwstatus&

#sleep 3

echo "Starting SDR1000 hardware interface"
USB=0
RFE=1
PA=1
PORT=0x8400
#PORT=33792
COMMAND_PORT=19501
STATUS_PORT=19502
/junk/hpsdrtest/sdr1000/build/linux/./sdr1000  --rfe --pa &
echo "kill -9 $!" >> kill.all.base