[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: insmod svgalib_helper.o module error



Jacob & Pierre,

This has been a long-lasting subject for discussions
(see old archives). It seems there has been a dialect
change in Linux commands with the change to 2.6.x ....
I noticed that 'insmod' (kernel 2.4.27) was equal to
'modprobe' in kernel 2.6.11 ... so you can try that.

If you are prepared to run 'Linrad' as super-user, then
you can change Makefile.conf (of SVGALIB) and uncomment
the line: # NO_HELPER = y (remove the first character #).

After 'make install' and 'make svga' you should have no
complaints about the helper module if you run 'su'

(password asked) and then: ./linrad

The above is from faint memory; good luck!

                      73, "Zaba"  OH1ZAA


At 12:13 16.5.2005 +0200, ON5GN wrote:

Hi Jacob,

Suse 9.3 uses kernel 2.6.11 and requires therefore kernel modules with a ".ko" extension instead of a ".o" extension. However, even with the right " .ko" extension , you will probably get the following error message: "-1 Unknown symbol in module" when you try to "insmod' the svgalib_helper.ko module.
At least , that's what I get on my Suse9.3 system  :-(
Up to now I haven't found a solution for that problem.
Maybe someone else on the list has a solution.

73,
Pierre/ON5GN

----- Original Message ----- From: "Jolite" <gcerrotta@xxxxxx>
To: "Linrad mailinglist" <linrad@xxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, May 16, 2005 9:11 AM
Subject: [linrad] insmod svgalib_helper.o module error


Hi Linrad users,
I have tried to compile svgalib-1.9.21 in SUSE 9.3. No error of compilation. When I try to read the module with insmod svgalib_helper.o I receive the following message of error :
insmod: error inserting 'svgalib_helper.o': -1 Invalid module format.
Someone can help me ?
Thanks
Jacob,  ic8fax

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>





#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL
i