[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] user_hardwaredriver.c forTS850S-application



Dear all,
 
having read Roger, W3SZ's time-saving add-on facility for controlling the Yaesu FT1000MP Tx frequency, I'd be curious to know whether someone has packaged the user_hardwaredriver.c for other popular IF-transceivers such as the Kenwood TS850S, I intend to use.
 
The Kenwood TS850 series external control instruction manual can be found, here: http://tk5ep.free.fr/tech/ts850/if232/if232.pdf
A closer look reveals that the Kenwood serial communication parameters seem equal to Yaesu's except for the start bit?
The TS850S commands of interest are:
- FA (=the set command for the frequency of VFO A)  followed by the Linrad frequency in Hz presented in 11 columns (preceeded by leading zeroes and with 1 Hz resolution) 
- MD (=the mode set command) succeeded by one of the following parameters: 1=LSB, 2=USB, 3=CW )
Every command is terminated by the semi-colon. (;)
 
I'm sorry to say, I'm as little experienced with C as with Linux...
 
Thanks in advance,
 
Michel, ON7EH

**** DISCLAIMER****
http://www.proximus.be/maildisclaimer


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL