[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: Linrad-02.05



Thank you for getting there before I had a chance. I love this tool. It has saved my technical ife on three occassions in the last year.

Bob



Ramiro Aceves wrote:
Hello Leif and others.

I have run xlinrad under "valgrind". I never had heard about this tool. Thanks to Bob for pointing in that direction! :-)

Valgrind suggests a "pointer out of bounds". If you need full valgrind output I can send it to you.




==6683== Process terminating with default action of signal 11 (SIGSEGV)
==6683==  GPF (Pointer out of bounds?)
==6683==    at 0x80BD3C0: lir_outb (io.h:99)
==6683== by 0x806E7FC: set_hardware_rx_frequency (in /home/ramiro/linrad-02.0 5/xlinrad)
==6683==    by 0x1B9E5B62: start_thread (in /lib/tls/libpthread-0.60.so)
==6683==    by 0x1BAEC189: clone (in /lib/tls/libc-2.3.2.so)
==6683==
==6683== ERROR SUMMARY: 4173 errors from 12 contexts (suppressed: 19 from 1)
==6683== malloc/free: in use at exit: 39917559 bytes in 57 blocks.
==6683== malloc/free: 107 allocs, 50 frees, 39957461 bytes allocated.
==6683== For counts of detected errors, rerun with: -v
==6683== searching for pointers to 57 not-freed blocks.
==6683== checked 107141096 bytes.
==6683==
==6683== LEAK SUMMARY:
==6683==    definitely lost: 0 bytes in 0 blocks.
==6683==      possibly lost: 544 bytes in 8 blocks.
==6683==    still reachable: 39917015 bytes in 49 blocks.
==6683==         suppressed: 0 bytes in 0 blocks.
==6683== Reachable blocks (those to which a pointer was found) are not shown.
==6683== To see them, rerun with: --show-reachable=yes
Violación de segmento

Hope this helps.




--
AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats,
NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman
Laziness is the number one inspiration for ingenuity.  Guilty as charged!


#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL