[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: [wsjtgroup] MAP65 crashes under Win XP



Hi Jeff,

> Thanks for the reply.  the value of "freq" in par_ssb_fg got set to
>     freq [0.124956000000000000000000000000]
> I didn't know what to do with the MHz.  without setting "freq",
> the waterfall display shows negative values.
> 
> The Rx lineup uses a Demi 144-28 and crystal controlled 28 MHz
> Softrock centered on 144.124956 MHz.

Tell this to Linrad by use of the freq control box:-)
freq=144.124956
Then MAP65-IQ should get the correct info from Linrad.
(in your case no hardware is affected, but Linrad does not care...)

73

Leif


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL