[Linrad] Re: RX overrun error

[Joe Taylor <Princeton.EDU; joe@xxxxxxxxxxxxxxxx>]

Hi Jan,

> Thanks for your reply. You ask if RX level that MAP65 shows is close to 0,
> no it is not. It is very high, about 65 dB.
> 
> Is this the problem?

Well, it is certainly *a* problem.  Hard to say, yet, 
whether it's *the* problem.

I suspect it means that you have not chosen a fixed-point 
FFT for the second FFT.  Off the top of my head, I forget 
the version numbers that Leif uses here; but whatever 
version you are now using -- I think probably a 
floating-point one -- change to another.

When I'm home again I will check the FFT versions I'm 
actually using.

	-- Joe

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL