[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Frequency scale in Linrad



Hello friends.

Use Linrad as front-end for MAP65 and WSJT.
To view an jt65 
signal, on the waterfall of linrad (SSB), shift the BFO to -1270.5 and filter 
to about 2.4 kHz.
The frequency in Linrad corresponds exactly to the specified 
frequency of MAP65 (+/- Doppler).
The audio output from Linrad, which uses as 
input for WSJT is perfectly focused (DF = 0) on the desired signal.

The 
problem is that the scales of frequency of all windows of Linrad indicate a 
different frequency, that is without compensation of the BFO.
It is difficult 
to click on the signal desired in high resolution spectrum, especially when 
there are many JT65 signals in a few kHz.

How to get the right indication on 
the scales-frequency of Linrad  ?

Thanks

73 Ermanno / ik7ezn

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL